不同边沿高度油池火燃烧行为的实验和数值模拟研究

采用实验和FDS数值模拟相结合的方法,探讨了边沿高度对油池火燃烧特性的影响。在实验部分,研究了燃烧速率和表观火焰高度随边沿高度的变化趋势,并分别分析了各个阶段的热反馈机制。在实验获得不同尺度、边沿高度正庚烷油池火燃烧速率的前提下,建立相应尺度的不同边沿高度油池火的Fire Dynamics Simulator(FDS)计算模型以针对火焰高度进行了数值模拟研究,分析了实际火焰高度、火焰下探高度随边沿高度的变化趋势,并提出了相关的无量纲拟合式。     

循环载荷下煤裂隙演化试验研究

为了研究循环载荷下的煤体裂隙演化特征，在不同应力水平和不同频率条件下分别进行煤样破坏力学及声发射试验。结果表明:应力-应变曲线呈疏-密-疏的变化特征，对应的振铃数柱状图呈U型；上限应力点的应变值、累积能量、撞击计数均随循环次数增加而上升，曲线呈倒S型；煤裂隙演化经历了原始裂隙闭合、新生裂隙稳定发育和裂纹贯穿破坏等3个不同阶段；循环载荷的应力水平和加载频率对煤体疲劳寿命的影响具有差异性，对煤体裂隙演化和破坏模式均有明显影响。     

Safe speed limits for a safe system: The relationship between speed limit and fatal crash rate for different crash types

Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.

Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.

Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.

Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design.     

Enhanced sludge solubilization by microbubble ozonation

A microbubble ozonation process for enhancing sludge solubilization was proposed and its performance was evaluated in comparison to a conventional ozone bubble contactor. Microbubbles are defined as bubbles with diameters less than several tens of micrometers. Previous studies have demonstrated that microbubbles could accelerate the formation of hydroxyl radicals and hence improve the ozonation of dyestuff wastewater. The results of this study showed that microbubble ozonation was effective in increasing ozone utilization and improving sludge solubilization. For a contact time of 80 min, an ozone utilization efficiency of more than 99% was obtained using the microbubble system, while it gradually decreased from 94% to 72% for the bubble contactor. The rate of microbial inactivation was obviously faster in the microbubble system. At an ozone dose of 0.02 g O₃ g⁻¹ TSS, about 80% of microorganisms were inactivated in the microbubble system, compared with about 50% inactivation for the bubble contactor. Compared to the bubble contactor, more than two times of COD and total nitrogen, and eight times of total phosphorus content were released from the sludge into the supernatant by using the microbubble system at the same ozone dosage. The application of microbubble technology in ozonation processes may provide an effective and low cost approach for sludge reduction.     

Relationships between anaerobic consortia and removal efficiencies in an UASB reactor degrading 2,4 dichlorophenol (DCP)

To gain more insight into the interactions between anaerobic bacteria and reactor performances (chemical oxygen demand-COD, 2,4 dichlorophenol-2,4 DCP removals, volatile fatty acid-VFA, and methane gas productions) and how they depended on operational conditions the microbial variations in the anaerobic granular sludge from an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 DCP was studied. The study was composed of two parts. In the first part, the numbers of methanogens and acedogens in the anaerobic granular sludge were counted at different COD removal efficiencies. The relationships between the numbers of methanogens, the methane gas production and VFA production were investigated. The COD removal efficiencies increased to 74% from 30% while the number of total acedogens decreased to 10 from 30 cfu ml(-1). The number of total methanogens and acedogens varied between 11 x 10(3) and 10 x 10(9)MPN g(-1) and 10 and 30 cfu ml(-1) as the 2,4 DCP removal efficiencies were obtained between 60% and 99%, respectively. It was seen that, as the number of total acedogens decreased, the COD removal efficiencies increased. However, the number of total methanogens increased as the COD removal efficiencies increased. Correlations between the bacterial number and with the removal efficiencies obtained in different operational conditions were investigated. From the results presented in this paper a high correlation between the number of bacteria, COD removals, methane gas percentage, 2,4 DCP removals and VFA was observed. In the second part, methanogen bacteria in the anaerobic granular sludge were identified. Microbial observations and biochemical tests were applied to identify the anaerobic microorganisms from the anaerobic granular sludge. In the reactor treating 2,4 DCP, Methanobacterium bryantii, Methanobacterium formicicum, Methanobrevibacter smithii, Methanococcus voltae, Methanosarcina mazei, Methanosarcina acetivorans, Methanogenium bourgense and Methanospirillum hungatei were identified.     

Restrictive dermopathy and fetal behaviour

We report three siblings from consecutive pregnancies affected with restrictive dermopathy (RD). During the second pregnancy, fetal behavioural development and growth were studied extensively using ultrasound at 1–4 week intervals. Dramatic and sudden changes occurred in fetal body movements and growth but not until the end of the second trimester of pregnancy. Prominent at that time were prolonged periods of fetal quiescence and very low heart rate variability, together with abnormally executed body movements of short duration. Retarded femoral development and jerky abrupt fetal body movements (abnormal movement quality) were already present in the early second trimester of pregnancy. Facial anomalies emerged despite the presence of fetal mouth movements. The clinical features of RD were only partly explained by present knowledge of skin development and the fetal akinesia deformation sequence hypothesis. Quantitative assessment of fetal movements proved to be a poor early marker for antenatal diagnosis of this disorder. Copyright © 2001 John Wiley & Sons, Ltd.     

Changes in fetal heart rate pattern after intrauterine paracentesis in one twin with meconium peritonitis

We report a case of in utero paracentesis of ascites in a fetus with meconium peritonitis due to volvulus at 34 weeks which resulted in the correction of an abnormal fetal heart rate pattern and enabled vaginal delivery by preventing abdominal dystocia. The intrauterine intervention also helped to establish the diagnosis and potentially reduced the respiratory compromise after birth. Copyright © 2001 John Wiley & Sons, Ltd.     

Fluctuations of Population Size and Structure in the Northern Mole Vole: Preliminary Analysis

Long-term stationary studies on the ecology of the northern mole vole (Ellobius talpinus Pall.), performed by the mark–recapture method from 1985 to 1997, have provided original data on population dynamics and structure. The analysis shows that, to reveal cyclic fluctuations of population size in this species, the period of three years should be taken as a unit of time for estimating the duration of one phase. The 12-year population cycle in E. talpinus has four distinct phases: an increase, a peak, a decline, and a minimum. At each phase, the population is characterized by certain features of family structure, age composition, birth and death rates, and the composition of migrants.     

母岩的风化剥蚀速率与土壤允许流失量的关系 --以长江三峡坝区风化花岗岩土壤为例

土壤允许流失量的确定是一个非常复杂而又必须解决的问题，它关系到水土保持措施的布设和土壤的可持续利用。然而，发育在不同母质上的土壤，其土壤的最大允许流失量差异很大，确定这一值的依据也各不相同。在岩成土壤地区，母岩风化剥蚀速率的大小直接影响土壤的发育。是确定土壤允许流失量、分析人类加速水土流失的重要依据之一。选长江三峡黄陵背斜段风化花岗岩土壤为研究对象，根据剥蚀沉积相关原理，通过恢复古地理环境及时代，计算出新生代以来本区花岗岩的平均风化剥蚀速率为16．97mm／ka．最大剥蚀速率为49．56。又根据区内太平溪流域的泥沙资料，算出了当地现代的剥蚀速率，多年平均为297．7mm／ka，最小值为31．5mm／ka，而水利部颁布的当地土壤允许流失量为200t／km^2,a，折合为76．9mm／ka，二者相差近1．5—4．5倍。基于此。提出了确定土壤允许流失量必须参考母岩风化剥蚀速率的新观点。